TEN-TEC Transceivers

What is the # symbol on the right side of the display on the Jupiter and…

Do I need an attenuator and isolation transformer to operate PSK with the Argonaut V? The…

Can my TEN-TEC transceiver operate on MARS frequencies? The following TEN-TEC Transceivers can be modified to…

Connecting a TEN-TEC transceiver to a non-TEN-TEC amplifier ALC CONNECTION BETWEEN THE TRNASCEIVER AND AMPLIFIER IS…

Does the frequency display on TEN-TEC transceivers , show receive or transmit frequency? The frequency display…

RIT/XIT will not reset on my Orion Check the RIT/XIT knob, it is possible that the…

How do I work split with the Eagle? Example: If a DX station is working split…

Omni V or Paragon will not receive Squelch is on or RF gain is turned down….

Omni VI will not transmit after amplifier has been disconnected TX EN and TX OUT jacks…

The Main tuning knob on my older Ten-Tec transceiver will not turn. The main tuning knob…

Tuning instructions for AM Operation with the Onmi VII Set the power output to the desired…

Trouble shooting the Omni-VI+ serial interface Connecting the Omni-VI+ to a computer can sometimes be a…

Omni VI Lock Pulse Rig should be on for at least 1/2 hour. Check 10MHz REF…

Orion / Orion II RAM Clear Orion off, power supply on. Press and hold the LCK…

Orion / Orion II Synthesizer Alignment Procedure Start on the 80 meter band, LSB, 1kHz tuning…

Model 801, 160 meter module information When using the Model 801, 160 meter module, with either…

Radio Screen Blank After Update Orion firmware versions after 1.363 have a new RAM-CLEAR feature that…

Orion Hardware Contrast Adjustment Remove the Orion’s covers (4 #2 Phillips and 18 #10 Torx screws…